BFTCK - ENGINE BRITE ENGINE CLEANER

  • MSDS: BFTCK
  • Manufacturer: GUNK LABORATORIES INC
  • Product Name: ENGINE BRITE ENGINE CLEANER
  • National Stock Number: 6850-00-861-1971
Product Identification

Product ID:ENGINE BRITE ENGINE CLEANER
MSDS Date:01/01/1985
FSC:6850
NIIN:00-861-1971
MSDS Number: BFTCK

Responsible Party
GUNK LABORATORIES,INC.
600 RADIATOR RD
INDIAN TRAIL, NC 28079-0159
US

Cage: MO121

Contractor
RADIATOR SPECIALTY CO
159 INDIAN TRAIL, NC 28079-0159 US

Telephone: 704-377-6555

Cage: 26965

Ingredients

SOAP & SYNDETS.

Fraction By Weight: 8.8%

ACGIH TLV: 1000 PPM


ALIPHATIC HYDROCARBON SOLVENTS

Fraction By Weight: 77.5%

ACGIH TLV: 500 PPM


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 1.7%

ACGIH TLV: >1000 PPM


ALIPHATIC HYDROCARBON PROPELLANTS.

Fraction By Weight: 12.0%

Hazards

Effects of Overexposure:SEVERE EYE IRRITATION,DRYING OF SKIN,EXCESSIVE
INHALATION CAUSES HEADACHE,GIDDINESS,NAUSEA,DIZZINESS

First Aid

First Aid:EYES:FLUSH WITH COPIOUS AMOUNTS OF WATER,CONTACT PHYSICIAN
IMMEDIATELY.SKIN:WASH WITH MILD SOAP& WATER.APPLY EMOLLIENT
CREAM.INHALATION:REMOVE TO FRESH AIR;APPLY ARTIFICIAL RESPIRATION
IF INDICATED.GE T MEDICAL HELP

Fire Fighting

Flash Point:141F TCC & -156F
Lower Limits:2.3
Upper Limits:2.5
Extinguishing Media:WATER FOG,CARBON DIOXIDE,FOAM,DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH HEAT OR FLAME MAY CAUSE
AEROSOL CAN TO EXPLODE

Accidental Release

Spill Release Procedures:FLUSH WITH WATER INTO RETAINING AREA OR
CONTAINER.AVOID EXPOSURE TO SPARKS,FIRE,OR HOT METAL SURFACES.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & OPEN
FLAMES.DO NOT STORE ABOVE 120F
Other Precautions:AVOID PROLONGED CONTACT WITH SKIN.USE WITH ADEQUATE
VENTILATION

Exposure Controls

Respiratory Protection:SELF-CONTAINED RESPIRATORY DEVICE FOR
CONCENTRATONS ABOVE TLV LIMIT
Ventilation:AS REQUIRED TO CONTROL TLV IN AIR
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:RUBBER TYPE APRON,EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
FLASH POINT OF ALIPHATIC HYDROCARBON PROPELLANTS IS - 156F TCC. FLASH
POINT OF LIQUID IS 141F TCC.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:-45-+500F.
Vapor Density:5.5
Spec Gravity:0.830
Evaporation Rate & Reference:BUTYL ACETATE-0.05
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT AMBER LIQUID,PLEASANT ODOR
Percent Volatiles by Volume:90.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE WITH APPROVED PROCEDURES OF REGULATOR AGENCIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.